Mix Hopper: Two, 8 quart (7.6 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) in Auto and Standby modes.
Indicator Lights: The Mix Low light alerts the operator to add mix. Audible alarm may be enabled to sound when mix is low.
Electronic Controls: Finished product quality is monitored by SoftechTM controls that measure viscosity.
Standby: During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.
Air Filter: Easily removable, cleanable air filter helps keep condenser clean for optimal refrigeration system performance.
Door Interlock System: Protects the operator from injury as the beater will not operate without the dispensing door in place.
Electrical:One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be cord connected. Consult the international Taylor distributor for cord & receptacle specifications for 50 Hz. equipment.
Beater Motor:Two, 0.5 HP
Refrigeration System:One, 3,500 BTU/hr compressor (nominal rating). R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (Actual BTUs will vary based on application.)
Air Cooled: Minimum Clearance: 6” (152 mm) on left and right, and 0” in the rear. Minimum air clearances must be met to assure adequate air flow for optimum performance.
Options: • Cone Dispenser
• Legs – [increase height of unit by 4-1/4” (108 mm)]
Dimensions: 22-1/8″W x 562mm”W x 25-1/8″D x 638mm”D x 29″H x 737mm”H